Monitor Audio Vector 5.1 set
- x4 Vector 10 Speakers (L/R/Rear)
- x1 Vector 20 Speaker (Center)
- x1 VW8 Subwoofer
 
 Vector 10 Features:
4” Driver with MMP II cone technology
25 mm Gold C-CAM tweeter
Magnetically shielded drivers. For safe use near sensitive microprocessor equipment or LCD/Plasma displays
Rigid moulded polymer cabinet with MDF baffle
Rear ported
Woven wire mesh grilles
Single through-bolt driver fixing/ bracing method
Single point wall bracket insert
 
Vector 10 Specs:
Frequency Response: 65 Hz - 30 kHz
Sensitivity (1W@1M): 85 dB
Nominal Impedance: 8 Ohms
Power Handling (RMS): 50 W
System Power Handling (RMS): 80 W
Recommended Amplifier Requirements: 10 - 80 W
Maximum SPL: 103
Bass Alignment: Bass Reflex - rear Ported
Drive Unit Complement: 1 x 4" MMP II cone mid-bass driver 1 x 1" (25 mm) Gold Dome C-CAM tweeter
External Dimensions (H x W x D): 235 x 145 x 170 mm (91/4 x 511/16 x 611/16 inch)
Weight (each): 2.17 kg (4.77 lbs)
 
Vector 20 Features:
4" Driver with MMP II cone technology
25 mm gold C-CAM tweeter
Magnetically shielded drivers. For safe use near sensitive microprocessor equipment or LCD/Plasma displays
Rigid moulded polymer cabinet with MDF baffle
Rear ported
Metal mesh grilles
Front porting for wall or cabinet mounting
Single point wall bracket insert
Single through-bolt driver fixing/ bracing method
 
Vector 20 Specs:
Frequency Response: 60 Hz - 30 kHz
Sensitivity (1W@1M): 85 dB
Nominal Impedance: 8 Ohms
Power Handling (RMS): 50 W
System Power Handling (RMS): 80 W
Recommended Amplifier Requirements: 10 - 80 W
Maximum SPL: 103
Bass Alignment: Bass Reflex - Front Ported
Drive Unit Complement: 1 x 4" MMP II cone mid-bass driver 1 x 1" (25 mm) Gold Dome C-CAM tweeter
External Dimensions (H x W x D): 145 x 355 x 170 mm (511/16 x 14 x 611/16 inch)
Weight (each): 2.66 kg (5.85 lbs)
 
VW8 (subwoofer) Features:
8" long throw woofer featuring MMP II cone technology
Forward firing driver with downward firing port
100 Watt (RMS) class A-B amplifier
Rigid MDF construction
Non slip rubber feet
Auto-on-off facility
Variable volume control
Variable Crossover/ frequency control from 45 Hz- 150 Hz
Switch-able phase control 0-180 degrees
RCA line inputs / LFE channel input.
 
VW8 Specs:
Lower Frequency Limit: 28 Hz
Mains Input Voltage: 110-120 Vac / 220-240 Vac 50/60Hz (manual selection)
Power Handling (RMS): 100 W (RMS) Class A-B amplifier
Low Pass Filter Alignment: 12 dB/ Octave
Cabinet Design: 18 mm MDF
Cabinet Support: Bass reflex – Downward firing
Drive Unit Complement: 1 x 8” long throw MMP II bass driver.
Input Impedance: 20 K Ohms
External Dimensions (H x W x D): 320 x 280 x 280 mm (125/8 x 11 x 11 inch)
Mains Input Voltage: 110-120 Vac / 220-240 Vac 50/60 Hz (manual selection)
Weight: 10.8 kg (23.8 lbs)