Hi-Fi Floorstanding Speaker – Borea BR08
 
The floor standing BR08, inspired by the iconic Antal speaker, was the reference model throughout the design of the Borea range. Elegant three-way floor standing with 4 transducers, it is one of the most appreciated high-fidelity models.

It incorporates a new 25mm EFS silk dome tweeter; a new 16cm midrange with a brand-new profile, based on the research on the natural cellulose paper used before in the Esprit Ez; and two new 16cm bass drivers in fiberglass.

Its three-way configuration diffuses all frequencies with no interference between the transducers, producing precise voices and instruments.

This floorstanding speaker will fit perfectly in rooms ranging from 20 to 40m2.
 
*Amplifier and Power HandlingRecommended Amplifier power : from 75 to 250 Watts (8 Ohms)Power Handling : 150W* The power handling of a speaker is the average continuous power that the speaker can accept without damaging the drivers. You can use an amplifier more powerful than the permissible speaker power by limiting the volume to 70% of the maximum capacity. Conversely, an amplifier that is too underpowered will clip and create distortion, which can also damage the speakers if it is used beyond its capacity.
 
Speaker Specifications
• Type : Floorstanding speakers with front bass reflex port
• Crossover : 3 Ways
• Sensitivity (dB/W/m) : 92dB
• Bandwith (+/-3dB Hz) : 40Hz-22 000Hz
• Nominal impedance : 8Ω
• Minimum impedance : 3Ω

* The impedance of a speaker can be simplified as an electrical resistance. The lower is the impedance of the speaker, the more current the amplifier will have to deliver.
- Nominal impedance is measured at a frequency of 1kHz
- Minimum impedance is measured at low frequencies.

TRIANGLE loudspeakers never fall below 3 Ohms, which means they can be used with almost all Hi-Fi and Home Cinema amplifiers.
 
Driver informations
4 Drivers :

• 1 x 25mm silk dome tweeter
• 1 x 16 cm midrange with natural cellulose pulp membrane
• 2 x 16cm woofer with fiberglass membrane
 
Crossover
Crossover Frequencies : 215Hz -3500 Hz
 
Weight & Dimensions
Speaker dimensions
• Width : 206 mm
• Height : 1020 mm
• Depth : 314 mm

Dimensions with pedestal (W x H x D): 260 x 1051 x 360 mm
Box dimension (per unit) (W x H x D): 311 x 1125 x 423 mm

Weight
• Net weight : 21,2 kg
• Gross weight : 24,1 kg